The process of adding alum to water to hasten sedimentation is called 'loading'. Why has this name been given to the process? (2024)

FAQs

What is loading explain the process of loading with alum for Class 6? ›

Alum is a substance which is used to fast the process of loading.. when alum is dropped in solution then the heavy particles of that solution becomes more heavy due to alum's chemical reacts with them and made them more heavier than before. and after becoming more heavier the particles settle depending fastly..

Solution : Alum gets dissolved in water and forms clusters with clay and dust particles making them heavier thereby increasing the rate of sedimentation.

By using alum in the water, the rate of sedimentation can be increased. This process is called 'Loading'. Here all the insoluble solid particles of the mixture get accumulated on alum leading to the separation of solid from insoluble solid particles.

The process of increasing the rate of sedimentation in a suspension by adding some chemical is known as loading. Alum is added in order to increase the rate of sedimentation. This process is used to remove clay and sand particles from mud water.

When alum is added to water, it dissolves in water and makes the suspended impurities heavier making them settle down quickly. Therefore, the addition of alum is known as loading.

Answer: Loading process (in chemistry) is the process used to speed up the sedimentation process with the help of chemical called 'Alum'. ... The process of sedimentation is time consuming as the suspended particles take time to settle down to bottom. The process is sped up by the process called 'loading'.

In a loading tank, coagulants like lime and alum are added to the water, which causes suspended particulates to clump together that allows the sedimentation of the suspended particles.

Loading : The process of adding a chemical to an impure liquid in order to increase the speed of sedimentation of suspended particles is called loading.

Answer: Loading is the process in which alum particles are deposited on suspended clay particles of muddy water to make them heavy and settle down rapidly. Muddy water is a mixture of water and suspended clay particles. The muddy water is taken in a beaker.

Loading is a process in which chemical substances like alum is added to liquid to help the suspended particles of liquid to form a sediment of solid. The suspended particles are lighter and do not settled at the bottom. to make these suspended particles heavier and settle down loading process is used.

What is loading used for loading? ›

Complete answer:

So, loading is the process used to speed up the process of sedimentation. And the chemical used in the loading is 'Potash Alum'.

The heavy particles of dissolved alum deposit on the suspended clay particles in water and settles down at the bottom. Thus, adding alums helps in purifying water.

Sedimentation is setting down of a substance generally in a liquid medium whereas loading is a process of making sedimentation faster. Loading can be seen when it rains. The rain drops make the dust particles to settle on ground faster.

Loading is a process used to speed up the process of sedimentation. The substance use in loading is "ALUM". It basically help in purifying the contaminated water. Copyright © 2022 Aakash EduTech Pvt.

sedimentation. decantation. sieving. process by adding chemicals, such as alum, is known as loading. The soluble alum entangles the impurities and makes them big enough to settle down.

Basically the loading process is a type of sedimentation process. It is the process by which the mixture of liquids which contain some impurities is separated by adding a chemical. This chemical makes the impurities heavier and settled at the bottom due to gravity.

Loading is a process in which heavy particles settle down at the bottom of the container and water comes up . Alum is a substance which is used to fast the process of loading.. ... the process of increasing the rate of sedimentation of particles by adding some chemicals to it is called loading.......

The process load server receives load requests for objects and retrieves, validates, and loads the object. Some objects may be executable and some may not, but our discussion focuses on the loading of executable objects.

Answer: loading is the process done in separation of substance in which metal is added and mixed into the substance so that the higher impurity settle down faster it is mainly done by doing sedimentation... it also saves our time...

Detailed Solution. The correct answer is Booting. In computing, booting is the process of starting a computer. Booting is a kind of start-up sequence that turns on the operating system of a computer when the system is turned on.

What is loading process what substances are used in this process where does this process is used? ›

The process of adding alum to water to hasten sedimentation is called 'loading'.

Load is the amount (mass) of a pollutant that is discharged into a water body during a period of time (i.e. tons of sediment per year).

Explanation: Load is defined as to fill something up or to provide with an excess. An example of load is to pile a truck with furniture. An example of load is to fill up on cheeseburgers and fries.

Alum is a substance that is used for the process of loading.

Biology. Carbohydrate loading, a strategy employed by endurance athletes to maximize the storage of glycogen in the muscles. Creatine loading, a phase of use of creatine supplements. Vocal loading, the stress inflicted on the speech organs when speaking for long periods.

Explanation: The process of increasing the rate of sedimentation of particles by adding some chemicals to it is called loading. Sometimes the solid particles present in a mixture do not settle easily during sedimentation, So some chemicals can be added to the mixture to enable the solids to settle down easily.

In loading, suspended contaminants are made heavier by adding alum that adds to them. After becoming heavier, those impurities settle down faster, making the liquid clear. This procedure is simple as it separates two liquids (Immiscible) that have different densities.

loading area means an off-street area, space, dock, door or berth used for the loading or unloading of cargo, products or materials from commercial vehicles.

Loading rate means the amount (concentration or mass) of constituents or parameters applied to a unit area per application.

When solid particles present in a liquid are not sufficiently heavy, they do not settle easily. This process of improving the settling property of solid particles by the addition of special chemicals such as alum is called coagulation or loading.

What is loading explain the process of loading? ›

Basically the loading process is a type of sedimentation process. It is the process by which the mixture of liquids which contain some impurities is separated by adding a chemical. This chemical makes the impurities heavier and settled at the bottom due to gravity.

Loading : The process of adding a chemical to an impure liquid in order to increase the speed of sedimentation of suspended particles is called loading. Was this answer helpful?

The loading method is the key to optimal performance when loading data from a source to the staging area. There are several loading methods, which can be grouped in the following categories: Loading Using the Agent. Loading File Using Loaders.

load·​ing ˈlō-diŋ : a cargo, weight, or stress placed on something. : load sense 12. 3. : material used to load something : filler.

What is the purpose of loading? Loading is a process used to speed up the process of sedimentation. The substance use in loading is "ALUM". It basically help in purifying the contaminated water.

Complete answer: Loading is the process by which the mixture of liquids and liquids containing tiny impurities is separated by adding a chemical that sticks to the impurities and makes them heavier. This is used in sedimentation to speed up that process.

The parent-delegation architecture to class loading was implemented to aid security and to help programmers to write custom class loaders. Class loading loads, verifies, prepares and resolves, and initializes a class from a Java class file. Loading involves obtaining the byte array representing the Java class file.

What is loading? Loading is the process by which the mixture of liquids and liquids containing tiny impurities is separated by adding a chemical that sticks to the impurities and makes them heavier.

the process of increasing the rate of sedimentation of particles by adding some chemicals to it is called loading. ... For example, when potash alum is added to dirty water, it attaches itself to the dirt particles and makes several dirt particles stick to each other.

Explanation: Load is defined as to fill something up or to provide with an excess. An example of load is to pile a truck with furniture. An example of load is to fill up on cheeseburgers and fries.