Unregistered
HeliFreak > R/C Batteries and Charging Support> LiIon, LiPo, NiCd & NiMh General | ||
![]() |
LiIon, LiPo, NiCd & NiMh General General Battery Support
LinkBack | Thread Tools | Display Modes |
![]() | #1 (permalink) |
Registered Users Join Date: Jan 2011 |
Hi all. I'm a competent solderer and was was recently trying to solder a connector to a 12 awg lead with my standard 30 watt Weller. I was having a difficult time getting the solder to flow nicely. In fact at one point I had to use an acetylene torch turned down way low. Obviously this is less than optimal, so I was wondering what wattage you all were using for stuff this size. Thanks. __________________ |
![]() | ![]() ![]() ![]() ![]() |
Sponsored Links | |||
Advertisem*nt | |
![]() | #2 (permalink) |
Registered Users Join Date: May 2008 | I use one of these.. or often a torch lighter for bullets etc. Weller 150W __________________ |
![]() | ![]() ![]() ![]() ![]() |
![]() | #3 (permalink) |
Registered Users Thread Starter Join Date: Jan 2011 | ok so I'm clearly not even in the right range __________________ |
![]() | ![]() ![]() ![]() ![]() |
![]() | #4 (permalink) |
Registered Users Join Date: Jan 2011 | My 40-watt Weller adjustable does the job, but I have to turn it up. Your 30 can probably do it.
This works for me without giving a cold joint. But yeah, a bigger iron works better. |
![]() | ![]() ![]() ![]() ![]() |
![]() | #5 (permalink) |
Registered Users Join Date: Jan 2008 | The wattage of the iron is usually secondary to the quality of the tip and the skill of the solderer. Get a good tip, keep it wet and use good skill, and you easily could solder 12awg with a 30W iron. As always, I recommend spending some money on a good soldering station like the Weller WES51 (available at Amazon for $83). The difference is night and day over cheap irons, not only making for a better soldering job but also making it much more enjoyable. __________________ |
![]() | ![]() ![]() ![]() ![]() ![]() |
|