How To Stop Fabric Edges From Fraying Using No-Sew Finishing Techniques. (2024)

A big part of working with fabrics, whether you are sewing a clothing item or working on a craft project, is using appropriate techniques to contain fraying edges. Unless you're working with fabrics that do not fray, almost all woven fabrics will produce some sort of fraying when cut. If you are not familiar with what fraying is- it is the unraveling of threads or yarns coming undone from the rest of the fabric structure along a cut edge. Anytime you work with fabric, regardless of the project, it is important to keep the fraying contained to a minimum in order to achieve a durable, professional finish.

What Is A No-Sew Fabric Finish

There are numerous clean finishing techniques used in dressmaking to contain fabric fraying and finish the edges of seam or hem allowance. Whether it is a serging, ziz zag (on a home sewing machine) or a conventional straight stitch, almost all of them entail the use of stitching. Using some form of stitching to prevent cut fabric edges from unraveling is truly the most effective way to ensure a long lasting, fully-functional result. By contrast, no-sew fabric edge finishes do not use a conventional stitch (whether machine or hand stitch) to contain fraying.

When To Use No Sew Finishes

Option 1: Using Nail Polish To Seal Fraying Edges Of Thin Fabrics

Using nail polish to contain fraying fabric edges is an easy, effective and quite inexpensive technique. It works best when used with thin, lightweight fabrics. As you'll see below, a thin layer of nail polish is applied along the fabric's cut edge. Once the nail polish dries, the unraveling threads are sealed and locked in place. Keep in mind however, that the nail polish technique does not work on all fabrics. A thick, highly textured textile will not withstand the nail polish application and the fraying may persist. A rule of thumb is to only use nail polish on thin, densely woven fabrics that are lightweight.

The densely woven poly satin fabric shown above has some extensive fraying along its cut edges. This satin textile is thin and dense enough to take on the nail polish technique efficiently.

1. It is recommended that before applying the coat of nail polish, the edge is trimmed to remove some of the hanging threads. This will give you a clean edge to work with avoiding some of the mess potentially caused by coating the loose threads with nail polish.
​All you have to do is cut very close to the edge to smooth it out, thus removing any excess fraying.

Once trimmed, you have a clean straight edge to work with. Try not to handle this cut edge too much until the nail polish is applied. You want to prevent additional fraying and maintain the smooth edge as much as you can until the nail polish coat is set in.

In this tutorial, we're using a conventional clear nail polish. Any color nail polish will basically give you the same results. If you want to match the color of the nail polish to that of the fabric, you may achieve a finish that blends into the edge and is less noticeable. It is really up to you what brand of nail polish or what color you choose.

2. Carefully run the brush over the fabric's edge making sure to apply the nail polish just to the very edge. Apply it in multiple strokes and make sure not to load the brush too much or you risk accidentally staining the fabric surface (or your work table!) .

3. After the application, let the nail polish dry for about 5-10 minutes before using the fabric. Allowing the nail polish to dry completely will ensure that the threads are sealed all the way.

Once the nail polish is fully dry, test the fabric's edge to make sure it does not continue to fray anywhere. If fraying persist in some spots, apply a bit more nail polish at those areas and allow the nail polish to dry again before finally using the fabric. You'll find that if used properly, this convenient no-sew technique is highly effective and long lasting.

Option 2: Stop Fraying By Burning Synthetic (Only) Fabric Edges

Before getting started on the burning technique, it is very important that you keep these 3 important precautions in mind:
1. Burning the edges to contain fraying should only be done on fabrics you know 100% are synthetic. Synthetic textiles, like polyester and nylon, are made of the same polymer that plastic is made from . This means that as opposed to burning, they will melt similar to plastic. If unsure whether your fabric is 100% synthetic, test a scrap over the sink (or a fire proof surface) and make sure it melts and not actually burn. If you find that the fabric burns as opposed to melt, this means it is either a natural-synthetic blend or 100% natural. Cotton, silk, bamboo, rayon (viscose), wool are all natural fiber contents that will cause the fabric to burn. For textiles consisting of these natural combinations, the no-sew burning technique will not work.
2. Do not use this technique on lengthier fabric edges. It should only be used on very short fabric edges (ideally not longer than 1") such as cording edges, binding ends, or the ends of thin fabric strips.
3. Last but not least, always work over the sink or other flame-proof surfaces when sealing fabrics with an open flame. It is also extremely important that if you've never applied this finish before, you test a scrap piece of the original fabric first, before working on the final project.

In the steps to follow, we'll seal the fraying ends of a thin fabric strip using the no sew burning technique. To stay in the safe zone, use an all purpose lighter as opposed to matches or other difficult-to-control fire sources.

Shown above- the end of the fabric strip is fraying extensively, causing the threads to unravel.

Holding the fabric strip with one hand, light the lighter with the other and run the fabric edge through the flame no longer than 1 second. You'll find that synthetic fabric edges will melt very fast, so just a split second of flame exposure is usually enough to give you an effective result. Remember, all you are trying to do is seal the unraveling edge while burning as little of the fabric strip as possible.

The melted edge forms a hard plastic-like coating which prevents further fraying. If you leave the fabric strip over the flame for too long, this plastic bubbly buildup will become very pronounced and bulky. If you can afford to loose some of the length, you can always re-cut the end to remove the bulky melted part and run it over the flame again for just a split second to re-seal the unraveling edge.

Option 3: Using Fabric Pinking Sheers To Contain Fraying

Every crafter and dressmaker, whether a beginner or more advanced, is familiar with the magic of the pinking sheers. Using pinking sheers to prevent fabric edges from fraying is a great technique both functionally and aesthetically. Leaving perfectly zig zaged edges, a good pair of pinking sheers is a must have tool for a variety of crafts as well as some apparel applications. Although it stops the fraying on most fabrics, the pinking no-sew technique is not always recommended for sewing apparel since it doesn't necessarily withstand long term wear and care. However, if you are sewing a garment for one time use, or perhaps a clothing item that will not be washed in a conventional washing machine, you can get away with using pinking sheers as a clean finishing technique.

As opposed to the nail polish and burning no-sew methods described above, pinking fraying edges can be done on almost all types of fabrics across longer lengths. It is fast, easy and fairly effective technique. In this tutorial, a more textured medium weight fabric is used. As shown in the image above, the cut edge frays quite a bit causing the threads to unravel extensively.

You may need to experiment with a few pinking sheer brands and styles before settling on one that you really like. The heavier duty ones (usually a bit more pricey) tend to last longer and provide a smoother finish. There is definitely a trial and error associated with choosing pinking sheers- you'll find that some of them may not work as well on certain fabrics, especially after extended use. You may also experience some issues using pinking sheers on densely woven satin fabrics (high sheen), some chiffon fabrics, or very textured boucle fabrics that fray a lot.

To apply the pinking, use your pinking sheers to cut straight along the fabric edge. Make sure to stay close to the actual edge but not so close that you blend in with the unraveling threads. You should see a smooth, crisp zig zagcut along the newly cut edge as shown in the image above.

Option 4: Using Adhesive Iron-On Hem Tape To Clean Finish Fabric Raw Edges

1. To use fusible iron-on hem tape on a conventional double folded edge finish you should first, pre-fold and iron the fabric edge once. Make sure to fold the edge in towards the wrong side of the fabric as shown above. Pre-folding and ironing edges in advance provides some easy to follow guideline that facilitate the construction steps to follow.

2. Once the first fold is set, align the iron-on hem tape with the fabric's edge as shown above. As far as what iron-on fusible hem tape you should use, this really depends on the size of the fold and the fabric you are working with. Thicker, more textured fabrics may require a larger width hem tape with increased bonding capabilities. Vise versa, a thinner, shorter width hem tape will be more appropriate for light to medium weight fabrics. If unsure, always read the package label and make your choice according to your fabric and sewing project at hand.

3. Fold once more to enclose the fusible hem tape and the fabric edge on the inside.Keep in mind that you should not be able to see the fusible tape at all- it should remain hidden between the folded fabric layers.

4. To bond the layers of the fold together, iron on top of the folded fabric edge as shown above. The glue particles in fusible hem tape will melt and permanently adhere the fabric layers together. As far as ironing power, use the highest heat that your fabric allows for.

Once the hem tape is applied, the fold should be permanently glued in place and the hem tape itself should not be visible along any portion of the folded edge. If some areas appear to be weaker and not fully bonded, iron them again ensuring that the second time around, enough heat is applied to completely melt the hem tape's fusible glue particles.

Fabrics that take on fusible hem tape best are those that are thicker and more textured in nature. Textiles that have a rougher, textured surface hide the bleed-through from the hem tape while also working well with the tape's bonding glue.