For all of ourUltrasonic Diffusers, we recommend using tap or bottled water because the natural minerals in the water allow the oil to cling to the particles and disperse further into the air. Water temperature can have an effect on mist output, too! Warmer water tends to create a fuller mist while cold water can inhibit ultrasonic vibrations, therefore producing less mist.
To extend the life of your diffuser, please be certain to use only100% Pure Essential Oils. by doing so, it will ensure your unit qualifies for any future warranty claims. any use of Fragrance Oils will void our warranty due to synthetic ingredients used. We've included a few directions below, to help with the maintenance of your diffuser.
1.) CLEANING METHOD
To clean, pour enough distilled white vinegar inside the empty water tank to cover the base of the tank. Let soak overnight. Rinse with warm water (being sure to avoid getting water into the air vent opening at the top of the tank). Take something soft such as a cotton swab or cotton ball and gently wipe up around the ceramic diffusing disc at the bottom of the tank. Refill with water, making sure the level is noticeably below the max fill.
2.) AIR DRYING METHOD
When adding water, be sure to avoid any water getting into the air vent opening at the top of the water tank. That opening leads directly to the electronics, the unit will not function correctly if they get wet. To be on the safe side, try air drying your unit by removing the top, flipping the base upside-down and letting air dry for at least 48hrs. When you go use again, be mindful of that air vent opening and make sure the water level is noticeably below the max fill indicator.
