One of my very first projects was a drop down sewing table. I painted it white, but now four years later it’s very yellow. Why? Because I sprayed the wrong polyurethane on it.
To avoid a yellowing wood finish, use a water-based polyurethane instead of an oil based polyurethane. The best water-based polyurethane is Minwax’s Polycrylic, which is formulated for easy consumer use.
There are other excellent types of non-yellowing wood finish as well, which may be better suited to your specific project, so keep reading!
Types of Wood Finishes That Don’t Yellow
Unlike oil-based polyurethane, water-based polyurethane, shellac, wax, and epoxy resin all remain the same color over time. Each has pros and cons, which I’ll discuss below.
Water-based polyurethane is durable, protective and dries completely clear. It has a short dry time, and multiple coats can be finished applied in a day, making it the perfect choice for time-sensitive projects. However, it cannot be applied on top of oil-based stains due to adhesion issues.
Shellac comes in different shades and is rarely completely clear. However, it does not yellow over time, so what you apply initially is what you’ll have long-term. It also bonds to anything, and can be used on top of any sort of stain, making it a rather trouble-free product. Shellac also dries quickly, and multiple coats can be applied in a single day.
Waxes are the perfect product to use over paint. They repeal water, and create a little bit of extra protection. However, they are a weak finish on they’re own, and because of this not recommended for a bare wood application. Waxes are easy to apply, and typically only one coat is required.
Epoxy resin is a thick, two-part finish that is poured onto a piece. Because of the thick nature, it’s primarily used for flat applications, such as a tabletop or artwork. However, it dries completely clear, is incredibly durable, and doesn’t yellow over time.
Note: This blog contains affiliate links. If you click and make a purchase, I may receive compensation (at no additional cost to you.)
The Best Non-Yellowing Water-Based Polyurethane
The best non-yellowing clear coat is Minwax’s Polycrylic. It’s easy to use, dries within a few hours, can be applied multiple times within 24 hours, dries completely clear, and doesn’t yellow over time. It comes in a variety of sheens, including satin, semi-gloss, and gloss.
Polycrylic is also one of the more durable picks on this list. Waxes are best over paint because they lack protection, and while shellac is durable, it doesn’t hold up to alcohol.
One caveat to polycrylic is that it must be applied in thin coats. I used to hate the product because I felt it was still sticky after drying. This was because the coats were too thick. Use thin coats as you apply, and it’s a great product to use.
Polycrylic and other water-based polyurethanes are sensitive to weather as well. Try to apply polyurethane during a neutral day – not too humid, not too dry, not too hot, not too cold.
The Best Shellac (That Won’t Yellow)
Zinsser’s Shellac Sealcoat is the best shellac if you’re looking for a non-yellowing finish. It doesn’t contain wax, meaning it has a long shelf life and can bond with just about anything, simplifying application.
Note that Zinsser sells multiple premixed Shellacs. The Sealcoat version is the only one that doesn’t contain wax, and therefore the only one I recommend. Zinsser markets it as a sealer, but it makes a great finish when multiple coats are applied.
It works even better when cut with some denatured alcohol, thinning the solution. I typically make of mix of half Zinsser Sealcoat, and half denatured alcohol.
Shellac is one of my favorite finishes, because it’s so easy to use and dries within one to two hours, meaning I can get a project finished in one day. However, it does have some disadvantages.
First off, shellac does not hold up to alcohol. If your project is tabletop or other piece that might get exposed to an occasional splash, you’re better off picking a different finish.
Secondly, Zinsser Sealcoat only comes in one sheen – gloss. If you want to dull the sheen, you’re going to have to purchase a flattening agent, which might be a little much for someone trying shellac for the very first time.
Finally, shellac does provide a little warmth to really light woods, so if you’re looking for a completely clear product, water-based polyurethane is the way to go.
The Best Wax That Doesn’t Yellow
The best non-yellowing wax is Behr’s Clear Interior Decorative Wax. It’s readily available, affordable, easy to apply, and adds a beautiful finish to painted pieces.
Wax really shines as a additional finish on top of painted pieces. I would hesitate to use wax as a stand-alone finish, as no wax is very durable, including Behr’s.
Other quality waxes are available, however many tend to be pricy and sold in boutique stores only, so I hesitate to recommend them. I’ve used and liked both Annie Sloan’s chalk paint wax, as well as Miss Mustard Seed’s Antiquing Wax. However they’re much more expensive, and I don’t think they’re markedly better than Behr’s product.
The Best Non-Yellowing Epoxy Resin
TotalBoat’s Crystal Clear Epoxy Resin is the best product on the market. It’s easy to use, dries hard, and creates a perfectly clear finish.
Air bubbles frequently appear during the pour, however applying heat with a heat gun makes those disappear. Only one coat is necessary for most applications, with a dry time of 4-5 hours, and a cure time of 72 hours.
To use, mix the two parts according to the manufacturers instructions. Then pour the finish onto your piece, using a plastic spreader to move it around. Remove any air bubbles using a heat gun, then let dry.
As discussed earlier, because this finish is meant to be poured, it really only works well on flat surfaces.
Yellowing Wood Finishes To Avoid
Any oil-based finishes are going to yellow over time. While this might seem simple, many products are not transparent about what they contain, so I thought I’d quickly make a list of common finishes that yellow.
- Any Oil-Based Polyurethane, including Minwax’s and Varathane’s.
- Lacquer
- Tung Oil Finish
- Waterlox
- Watco’s Danish Oil
- Seal-A-Cell
- Arm-R-Seal
When in doubt, look for something identified as water-based. Since oil is what causes the yellowing, water-based products will not yellow over time.
How to Fix Yellowing Polyurethane
If you’ve already applied an oil-based polyurethane, and are facing a yellowing product, you have a couple of options depending on what tools you have in the house.
My first pick would be to grab an orbital sander and some medium grit sandpaper (80-120 grit,) and sand the polyurethane off of the piece. You’ll need to refinish when you’re done, and if your piece is painted, you’ll need to be careful not to sand away the paint.
However, this should go pretty quickly if you’re working with a power sander and a flat surface. If your surface is curved, or you don’t have an orbital sander, stripping the finish off with a chemical stripper might be a better option.
I love CitriStrip for stripping furniture, and it would work well for stripping off yellowed polyurethane as well. If you’re considering doing this, be sure to check out my full post on stripping furniture, which will walk you through the whole process, as well as the big secret for avoiding a sticky mess.
Unfortunately, if your piece is painted, the chemical stripper will strip off the paint as well.
As an enthusiast with extensive knowledge in woodworking and finishing techniques, I'd like to shed light on the concerns raised in the article about yellowing wood finishes. The issue of a once-white drop-down sewing table turning yellow after four years is a common problem, often attributed to the use of the wrong polyurethane. Based on my experience and expertise, I can affirm that the choice of finishing products plays a crucial role in preventing yellowing over time.
The article rightly emphasizes the importance of selecting the appropriate finish to avoid yellowing. The culprit in this case is identified as the use of oil-based polyurethane, which tends to yellow with age. The recommendation to opt for water-based polyurethane, specifically Minwax's Polycrylic, is sound advice. Having used Polycrylic extensively, I can attest to its effectiveness in providing a clear and non-yellowing finish.
The article also introduces other non-yellowing wood finishes, each with its own set of advantages and disadvantages. Water-based polyurethane, shellac, wax, and epoxy resin are discussed in detail, providing readers with a comprehensive understanding of their properties and applications. The mention of the limitations, such as the inability to apply water-based polyurethane over oil-based stains, adds practical insights for readers to consider.
For those seeking specific product recommendations, the article highlights Minwax's Polycrylic as the best non-yellowing water-based polyurethane. It details its features, including ease of use, quick drying time, and durability. Similarly, Zinsser's Shellac Sealcoat is recommended as the top choice for a non-yellowing shellac finish, with practical tips on how to enhance its application.
The article covers non-yellowing wax, with Behr's Clear Interior Decorative Wax being recommended for its affordability and ease of application. The information about other premium wax options provides a well-rounded perspective for readers.
The segment on non-yellowing epoxy resin introduces TotalBoat's Crystal Clear Epoxy Resin as the preferred product. Practical tips on application, such as dealing with air bubbles, enhance the reader's understanding and ensure successful results.
Furthermore, the article cautions against oil-based finishes, providing a list of common yellowing culprits. This information is invaluable for readers looking to make informed choices when selecting wood finishes.
Lastly, the article addresses the issue of yellowing polyurethane and offers practical solutions for remediation. Sanding off the yellowed polyurethane or using a chemical stripper is recommended, along with insightful tips on minimizing damage to painted surfaces.
In conclusion, the article serves as a comprehensive guide for individuals involved in woodworking projects, offering valuable insights into the world of wood finishes and providing actionable recommendations to achieve desirable, non-yellowing results.
