Tenda TEG1124P-24-250W 1000M and PoE 24-Port Gigabit Ethernet Switch w (2024)

TEG1124P-24-250W is a Tenda PoE switch that o ers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch o ers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras

Standard & ProtocolIEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at
Indicator24 × Link/Act per device
24 × PoE per device
1 × Power per device
Interface24 10/100/1000Base-T ports(Data/Power)
Lightning Protection6KV
Store &ForwardYes
exchange capacity48 Gbp
Packet Forwarding Rate35.6Mpps
RAM Data Buffer4Mb
MAC Address Table4K
PoE supply managementPort 1-24 support IEEE802.3at/af PoE standard
PoE through pin1 2 4 5 +/3 6 7 8 -
Input PowerAC: 100-240V~50/60Hz
Dimension440 × 178 × 44mm( W x D x H )
Power Consumptionin full con guration:<250W
PoE Max Power Supply: 225W
Port FeaturesStandard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities
over the other ports. All the ports of the switch can communicate with each other.
VLAN: ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24(uplink ports) respectively.
Isolation: ports 1 to 12 and Ports 13 to 24 belong to two di erent VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.
EnvironmentOperating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Package Content:
1 x Tenda TEG1124P-24-250W 1000M and PoE 24-Port Gigabit Ethernet Switch with 24-Port PoE

Shopping Planet dispatches your purchased items within 24 working hours after the payment is received. You will receive an email confirmation of your order including a tracking number, as soon as your goods are dispatched. We pride ourselves on providing you with the best value product and outstanding service.

Our warehouse is based in Melbourne but unfortunately not accessible to the public and pick up. However we offer free shipping on the majority of our items to almost anywhere in Australia. We are working with Allied Express, Australia Post, Fastway, Hunter Express and Toll to provide the most efficient delivery and service.

The estimated delivery time frames are:

For customers in VIC, approximately 4 – 7 working days.
For customers in NSW, SA, ACT, QLD approximately 6 – 8 working days.
For customers in NT, WA and TAS, approximately 8 – 10 working days.


We cannot ship to post offices, PO boxes, locked bags, parcel lockers or parcel collect locations.

Q: I received a faulty or damaged item, help!!

A: Please contact us within 10 working days in the unlikely event that the item arrives damaged or faulty. In addition to a detailed description, please provide images (or a short video clip if more appropriate) of the damage in order to proceed with the warranty process. Once assessed and approved by our customer service team, you will be contacted to proceed with the return, refund or replacement process. Please do not attempt to return the item without our approval.

Q:What warranty do you provide?

A: Non electronic products offer a 12 month warranty unless stated otherwise. Electronic products offer a 3 month warranty unless stated otherwise. If your product becomes faulty after receiving it and is within the warranty period, please contact us for assistance.

Q:Do I need to pay for return postage if my item is faulty?

A:Customers will not be required to pay for return postage if an item is faulty. If the item is required to be returned, we will arrange a return postage label at our expense.

Q: I’ve changed my mind, I don’t want the order any more.

A:Change of mind orders are accepted only under certain conditions. You must contact us within 10 business days of receiving your order, and the order must be unused and in the original packaging. Please provide photos to demonstrate this is still the case.

Q:What fees are associated with change of mind orders?

A: A 20% change of mind fee applies. A refund minus 20% of the purchase price will be provided once the order is received back into the warehouse.

Q:Do I need to pay for return postage if I change my mind?

A: Customers are responsible for return postage back to the warehouse. If we provide a return postage label, in addition to the 20% change of mind fee, the return postage will also be deducted.

Tenda TEG1124P-24-250W 1000M and PoE 24-Port Gigabit Ethernet Switch w (2024)

FAQs

How many watts does a 24 port PoE switch use? ›

Total PoE power budget on 24 10/100/1000 ports is only 180 W. Therefore, the maximum power output per PoE port is up to 15.4 W on 11 ports or 7.5 W on 24 ports simultaneously.

What is the difference between a Gigabit Ethernet switch and a PoE switch? ›

In summary, the main difference between PoE and Gigabit switches is that PoE switches have the capability to provide power to connected devices, while Gigabit switches offer faster data transfer speeds.

What is a Gigabit PoE switch used for? ›

A PoE switch allows compatible devices to work in places where power outlets or network connections don't exist. This primary function of PoE can save businesses lots of money on the costs of installing electrical and network wiring (more on that below) while still having edge devices work where they are needed.

What is the difference between Power over Ethernet and switch? ›

As the name suggests, a non-PoE switch does not support Power over Ethernet. This means that it cannot provide power to devices connected to it, such as IP cameras or VoIP phones. On the other hand, a PoE switch can supply power to these devices through Ethernet cables.

Do PoE switches use a lot of power? ›

PoE Switch Power Budget

Some managed PoE network switches used in large enterprise environments may up to 400W power budget, but for a home network, it's wise to use a basic unmanaged PoE switch with just 60W power budget.

How many PoE watts do I need? ›

It depends on what you're connecting. Some devices need more power than others. Most devices—phones, basic cameras, most wireless APs—do just fine with no more than 30-Watt PoE. Though a growing number of devices can use more.

Is an Ethernet switch faster than a router? ›

For instance, in environments with MAN or WAN types of networks, a router works faster than a network switch. Network switch: In contrast, network switches are only used for LAN environments. In LANs, a network switch is faster.

Is an Ethernet switch better than WIFI? ›

Typically advantages wired networks include; faster upload and download speeds, as well as better security from hacking and other unauthorised usage of the network. Arguably the most important aspect that makes wired networks better: security.

What is the difference between a PoE switch and a PoE switch? ›

The primary differences between PoE switches and regular switches relate to PoE accessibility. A regular switch is not PoE enabled to supply power over Ethernet. A regular switch, however, can become PoE enabled by connecting a PoE injector or PoE splitter.

What are the cons of PoE switch? ›

PoE drawbacks
  • Outages. A single PoE connection usually connects to multiple devices. ...
  • Power limits. Devices supported under the 2003 PoE standard are limited to 30 W. ...
  • Higher switch costs. ...
  • Distance limits. ...
  • Security.

Do I really need a PoE switch? ›

PoE switches have significant advantages. Since they cover both power and data, you only need one Ethernet cable for each device. This feature becomes more useful when you have a few power outlets and limited space for cables. With the help of these PoE switches, you can organize the cables.

How to connect PoE switch to router? ›

Instructions for Connecting A POE Switch to a POE NVR
  1. Step 1: Get a POE Switch. The first thing you want to do is to get a POE switch. ...
  2. Step 2: Connect your IP Cameras to the POE Switch. ...
  3. Step 3: Plug Your POE Switch into the Router. ...
  4. Step 4: Now Power on the POE Switch. ...
  5. Step 5: Add the Cameras to Your NVR.

Do I need a router if I have a switch? ›

In practice, what this means is that routers are necessary for an Internet connection, while switches are only used for interconnecting devices. Homes and small offices need routers for Internet access, but most do not need a network switch, unless they require a large amount of Ethernet* ports.

Does the switch go before or after the router? ›

Commonly, in a home setup, you will see the modem installed first, followed by a router and then the Ethernet switch. Here is the key operational principle: the modem passes the public IP address to the router, and in turn the said router assigns private IP addresses to the devices connected to it.

Can I use a PoE switch as a normal switch? ›

Can I use a PoE switch as a regular switch? Yes. If the PoE Ethernet switches does no detect any connected devices requesting power, then it will simply function as a normal Ethernet switch. No special configuration or setting is required for this.

Can a PoE switch be used as Ethernet switch? ›

Can I use a PoE switch as a regular switch? Yes. If the PoE Ethernet switches does no detect any connected devices requesting power, then it will simply function as a normal Ethernet switch. No special configuration or setting is required for this.

What is the difference between a PoE and an Ethernet port? ›

Ethernet cables can carry electrical current in addition to data, which are sent simultaneously using separate wires. Devices with PoE can therefore receive both power and data from a single Ethernet cable. Devices that do not have PoE only receive data from an Ethernet cable.

How do Gigabit Ethernet and PoE work on the same wire? ›

So how do Gb Ethernet and PoE work on the same wire? CiscoLadder likes this. The answer is through the use of phantom power—power sent over the same wire pairs used for data. When the same pair is used for both power and data, the power and data transmissions don't interfere with each other.

What does PoE mean on Ethernet switch? ›

Power over Ethernet (PoE) is a technology that allows network switches to transmit both power and data through an Ethernet cable simultaneously. PoE Network Switch. Power. IP Camera. Data.

Top Articles
Latest Posts
Article information

Author: Ouida Strosin DO

Last Updated:

Views: 5775

Rating: 4.6 / 5 (76 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Ouida Strosin DO

Birthday: 1995-04-27

Address: Suite 927 930 Kilback Radial, Candidaville, TN 87795

Phone: +8561498978366

Job: Legacy Manufacturing Specialist

Hobby: Singing, Mountain biking, Water sports, Water sports, Taxidermy, Polo, Pet

Introduction: My name is Ouida Strosin DO, I am a precious, combative, spotless, modern, spotless, beautiful, precious person who loves writing and wants to share my knowledge and understanding with you.