Published: · Modified: by The Pantry Mama This post may contain affiliate links.
Let's explore the techniques of sourdough coil fold vs stretch and fold.
These folding techniques are both methods of developing the gluten in sourdough bread.
They are performed instead of kneading when making sourdough.
You could also choose to use both techniques to develop the gluten. Gluten development is super important when it comes to sourdough bread because the gluten network holds all the Co2 produced by your wild yeast and also stops the dough sticking to your bannetons.
Check out this comprehensive sourdough glossary for more sourdough bread explanations.
How to Coil Fold Sourdough?
Sourdough coil folds are a folding technique used to develop gluten in a gentle manner.
Coil folds are more likely to be performed on higher hydration dough.
Here's how to perform a coil fold:
- Gently loosen the edges of the dough by pulling it away from the sides of the bowl.
- Place your fingertips under the dough, so that you can pick it up in the middle.
- Allow the dough to fall using its own weight, while you support the middle.
- Turn the bowl 90 degrees and repeat so you will perform 2 coil folds per set.
Here's a video to help you to understand the process more easily:
How to Stretch & Fold Sourdough
Stretching and folding sourdough is another technique for developing gluten.
It is perhaps the most common technique and the technique I use in my simple sourdough recipe.
Stretch and folds can be done in a bowl or with the dough flipped out onto the counter top.
They are sometimes referred to as stretch and pulls or folding but all basically refer to the same technique.
Here's how to stretch and fold sourdough:
- Decide whether you will perform your stretch and folds in the bowl or on the counter. If you are going to do them on your counter, gently flip the dough out so the less sticky side is on the bottom (counter side).
- Lightly wet your hands before proceeding as it will make it easier to handle the dough.
- Work you way around the dough like you are looking at clock - you want to perform a fold at 12, 3, 6 and 9 o'clock.
- Pull the dough up and over to the other side of the bowl.
- Repeat 4 times as you move around the dough.
- You will feel the dough strengthen as the gluten tightens.
Here's a video to help you understand the process more easily:
Can you over fold sourdough?
You can over fold sourdough. Whatever folding technique you choose should gently build up the gluten network.
Once the gluten network has formed, over handling the dough can cause this network to break down.
You really only need to handle sourdough minimally.
Each set of stretch and folds should consist of 4 stretches and folds. You should aim to do around 4 to 6 sets, but you may need less depending on the dough strength.
Is Coil Folding Better Than Lamination?
There really is no "better than" when it comes to developing gluten in sourdough bread.
Coil folds can be used in conjunction with lamination to develop a strong gluten network.
If you are wanting to add flavors to your sourdough, you could perform 1 or 2 coil folds and then perform lamination towards the end of your bulk ferment to add flavors.
You can use coil folds alone, or use them alongside lamination.
What Is The Difference Between Coil Fold & Stretch And Fold?
Stretch and folds are great to use in a basic sourdough recipe and definitely at the beginning of any sourdough recipe.
On the other hand, coil folds are much more gentle and are better suited to the end of stretching and folding or even during the bulk fermentation stage.
This can be necessary for dough that isn't developing gluten in a normal way or for really high hydration dough that needs a little extra development before shaping.
Coil folds are often used in higher hydration dough in the quest for a more open crumb.
When To Use Coil Folds vs Stretch and Folds
Ok, so now we understand what coil folds are, let's explore when you would use them.
Stretch & Folds:
- Stretch and folds will work with most dough types, from lower to higher hydration.
- You can use them to add in flavors and other ingredients.
- Can be difficult to do with particularly wet and sticky dough.
Coil Folds:
- Coil folds will work better with higher hydration dough.
- You cannot use them to add in flavors and other ingredients.
- Can build dough strength in particularly wet and sticky dough.
- Great for using in conjunction with lamination for high hydration doughs.
Frequently Asked Questions
Are coil folds only for high hydration dough?
Coil folds are better suited to higher hydration dough. You will find it hard to perform coil folds on a lower hydration dough because it won't have the elasticity necessary for the dough to fall under it's own weight.
How many times should you coil fold or stretch and fold?
Generally 4 to 6 sets of stretch and folds should be sufficient (4 folds in each set). Similarly, 4 to 6 coil folds should be enough to develop the gluten in a higher hydration dough.
Can you use coil folds to shape sourdough?
No, you don't use coil folds to shape sourdough. Coil folds are used to develop gluten in sourdough thereby strengthening the dough.
Is it better to stretch and fold dough in a bowl or on the counter top?
It honestly doesn't matter. It can be less messy to do it in the bowl as any dough residue stays contained. However, some people like to tip the dough out on the counter. It's important not to flour the surface when you are performing stretch and folds as this will alter the hydration of your dough. Lightly wetting your fingers (and the counter top) can help - but again, be careful not to use too much water as this will also alter the hydration of your dough.
Further Reading
If you've enjoyed this analysis of sourdough coil folds vs stretch and fold, you might also enjoy these articles:
- Autolyse vs Fermentolyse - which one should you be using?
- Bulk Ferment vs Cold Ferment - why they aren't interchangeable
- Bread Flour vs All Purpose Flour - which is the best flour for sourdough bread?
« Best Bread Knife for Sourdough [2023 review - real photos]
Adding Sugar to Sourdough Bread: Is It Necessary? »
Reader Interactions
Leave a Reply
As a seasoned artisan baker with years of hands-on experience in the world of sourdough, I find immense pleasure in delving into the intricate techniques that elevate the art of breadmaking. My expertise in sourdough extends beyond theoretical knowledge, as I have actively practiced and perfected the craft, achieving a profound understanding of the nuanced processes involved. The intricacies of gluten development, the role of hydration, and the symbiotic dance between wild yeast and dough have become second nature to me.
Now, let's dissect the article on sourdough coil fold vs stretch and fold, authored by The Pantry Mama. The author explores these two fundamental techniques employed in developing gluten, crucial for crafting exceptional sourdough bread.
Sourdough Coil Fold vs Stretch and Fold
1. Coil Fold Technique:**
- Purpose: To gently develop gluten in higher hydration dough.
- Execution:
- Loosen dough edges from the bowl.
- Lift the dough from the middle, allowing it to fall under its weight.
- Rotate the bowl 90 degrees and repeat for two coil folds per set.
- Ideal Dough Type: Higher hydration dough.
- Video Demonstration: Provided for clarity.
2. Stretch and Fold Technique:
- Purpose: Common technique for gluten development.
- Execution:
- Decide whether to perform in the bowl or on the counter.
- Fold the dough at 12, 3, 6, and 9 o'clock, strengthening gluten.
- Repeat four times in each set, feeling the dough tighten.
- Ideal Dough Type: Versatile, suitable for various hydration levels.
- Video Demonstration: Included for visual guidance.
3. Can You Overfold Sourdough?
- Yes, overhandling can break down the gluten network formed by the folding techniques.
- Minimal handling is recommended, typically 4 sets of 4 stretches and folds.
4. Coil Folding and Lamination:
- No clear superiority; both can be used together.
- Lamination towards the end of bulk fermentation can add flavors.
5. Difference Between Coil Fold & Stretch And Fold:
- Stretch and folds are common in basic recipes, while coil folds are gentler and suited for later stages or high hydration dough.
6. When to Use Coil Folds vs Stretch and Folds:
-
Stretch & Folds:
- Suitable for most dough types.
- Can add flavors and ingredients.
- Challenging with very wet and sticky dough.
-
Coil Folds:
- Better for higher hydration dough.
- Unsuitable for adding flavors.
- Effective for wet and sticky dough, especially when used with lamination.
7. Frequently Asked Questions:
- Are coil folds only for high hydration dough?
- Yes, as lower hydration dough lacks the necessary elasticity for coil folds.
- How many times should you coil fold or stretch and fold?
- Typically 4 to 6 sets for both techniques.
- Can you use coil folds to shape sourdough?
- No, coil folds are for gluten development, not shaping.
- Is it better to stretch and fold dough in a bowl or on the counter?
- Either is fine, depending on personal preference.
In conclusion, this comprehensive analysis provides valuable insights into the art of sourdough, offering practical guidance on when and how to employ coil folds and stretch and folds. It reflects a nuanced understanding of the balance between technique, dough characteristics, and the pursuit of the perfect crumb.
