Paint Sealer Water Repellent Protection For Painted Surfaces
The best paint sealer for vertical and horizontal painted surfaces.
Protect, restore, and extend the life of your home with Rainguard Water Sealers Premium Paint Sealer. This sealer is formulated with a water-based silane and siloxane acrylic blend to provide superior protection againstwind driven rain, mold, mildew, and other moisture damage. The non-toxic formula creates a semi-satin sheen with minimal change to the surface texture and will not create a surface that is any more or less slippery than it already is.
- Dries with a clear semi-satin sheen
- Prevents growth of mold and mildew
- Resists surface damage caused by chalking
- Will not yellow, crack, or peel – even in direct sunlight
*Looking for superior salt protection for painted surfaces? Try Garage Floor Coating.
What makes Paint Sealer different? A proprietary ingredient called Micro-Lok™. This additive ensures the absorption of the sealer into the surface and creates a long-lasting hydrophobic barrier that is not affected by weathering, dirt, freezing temperatures, UV light, and wind-driven rain, among many other damaging elements.
Where To Use
Perfect for interior or exterior use on painted floors, chimneys, patio furniture, fences, walls, garden fences, and any other painted surfaces.
Coverage
Up to 150 sq. ft. / gallon
Number Of Coats
At least 2 flood coats are needed. Depending on surface porosity, additional coats may be needed.
Application Temperature
Between 40°F – 80°F
How To Apply
Paint Sealer should be sprayed on with a hand-pump garden sprayer. Please read our Application Guide fully before starting your project: AppGuide2020.pdf
Dry Time
| 40°F | 75°F | 100°F | |
| To Touch | 2 Hours | 1 Hour | 30 Min |
| Light Foot Traffic | 2 Hours | 1 Hour | 30 Min |
| Heavy Foot Traffic / Tire Traffic | 10 Hours | 8 Hours | 5 Hours |
| To Cure | 10 Days | 7 Days | 5 Days |
Easy Clean Up
Simply use soap and water directly after the application is completed. Be sure to clean any overspray on glass and decorative metals with a clean damp cloth.
FAQ
>> Can I use this on an unpainted surface?
No. You will want to use the appropriate sealer for your surface which you can find here.
>> Can I paint over Paint Sealer at a later time?
Yes. You can paint over Paint Sealer but keep in mind it will not protect the new paint from moisture damage. You may want to use Paint Sealer after the surface is painted and fully dry to protect the new layer of paint from moisture damage.
>> How long do I wait after I paint my surface before I can apply Paint Sealer?
You will want to wait 3-4 days after painting before applying Paint Sealer on top.
>> What is freeze / thaw damage?
You can read about freeze / thaw damage on our blog here.
>> What is the mix ratio for the concentrates?
For the quart concentrate that makes TWO gallons – Dilute 1 part concentrate to 7 parts clean water. Store the remainder in a temperature-controlled environment (meaning do not let freeze or overheat).
For the quart concentrate that makes FIVE gallons – Dilute 1 part concentrate to 19 parts clean water. Store the remainder in a temperature-controlled environment (meaning do not let freeze or overheat).
Weather Conditions:
Apply during moderate temperatures when humidity and dew point levels are low. If it is expected to rain within 24 hours of application, postpone your project until weather conditions improve. If you need to store the product until a later date do not store in direct sunlight/high temperatures or allow the product to freeze. For more specific details please contact us by phone or email listed below.
Clean and Prep:
Gently brush out any stains with a soft bristle brush or rag using Rainguard Cleaner/Prep. If you plan on pressure washing, make sure to remove stains with Cleaner/Prep first. Once the surface is clean, make sure to let it dry until it is “bone dry”. This will allow the sealer to absorb deep into the surface for maximum protection. Think of your surface as a sponge. A wet sponge will not be able to absorb as much as a dry sponge.
Protect anything you don’t want sealed by moving it out of the way or covering it with a tarp or drop cloth (including your and/or the neighbors car). All Rainguard Premium Project Sealers are eco-friendly and safe for people, pets, and plants. A small amount of overspray on your plants or grass will not effect them. However, sometimes large leaf plants will show droplets from overspray, so you may want to move or cover them up before application.
Mixing:
READY TO USE products (white bottle) can be shaken lightly before use to disperse any settled material.
CONCENTRATES (black bottle) are the best value and mixing is simple. 1. For Eco-Pods or concentrates that make 1 gallon, empty the contents directly into a 1 gallon hand pump garden sprayer and fill with clean water. Mix lightly to disperse material. 2. For the quart concentrate that “makes 2 gallons”, empty the contents of the quart into an empty 5 gallon pail then add clean water to the 2 gallon mark. Mix lightly. Note: If there is no 2 gallon mark visible, first add 2 gallons of water into the empty 5 gallon pail and mark the water level with a sharpie marker. 3. For the quart that “makes 5 gallons”, empty the contents of the quart into an empty 5 gallon pail then fill with clean water. Mix lightly.
Application:
Always apply at least 2 (two) heavy coats of sealer to your surface. Older surfaces may require more than two coats, depending on surface porosity. Once the first coat is dry to the touch apply the second saturation coat. When the second coat is completely dry you can now put any decor, furniture etc. back on the treated surface.
Vertical Surfaces:
Spray starting at the top of the surface allowing the product to saturate and drip heavily before moving onto the next spot. Slowly spray in a horizontal cross hatch motion, maintaining at least a 6-inch drip or run down.
Horizontal Surfaces:
Spray the product until it starts to pool up slightly. You will know enough is applied in any given spot when the product starts to pool (puddle) up with a milky-white color. Although the puddling will dissipate slowly into the pores, you may wish to back roll or brush out puddles for a faster dry time.
For small areas such as bannisters: USING A BRUSH IS NOT RECOMMENDED. You may use a 1/4” nap roller, making sure roller is soaking wet and apply 3 coats per one spray coat (meaning a total of 6 coats rolled to equal two coats sprayed).
IMPORTANT: Avoid letting any water to come in contact with your newly sealed surface for 24 hours. After full cure time is achieved (approximately 4-7 days at 75° F) you can expect the full beading effect. Wait to test water repellency after the full chemical cure period. To conduct a test, simply drip some water in a few places where you have sealed the surface. If the drips make the surface darken, this is an indication that it is still absorbing, meaning you need to apply another coat. (This issue is most common with older surfaces).
Clean-Up:
Rainguard Water Sealers uses a water based formula. Simply rinse out equipment with clean water until it runs clear. Any undesired over-spray on windows or glass can be immediately wiped off with a clean cloth. If the product has already dried it can be washed off quickly with a clean cloth, warm water, and a mild soap.
Anything we missed? Call us at 949-515-8800, chat is also available on the lower right side of this page, or email us: info@rainguard.com
As an expert in protective coatings and water repellents, I bring a wealth of knowledge and practical experience in the field. I've extensively researched and worked with various paint sealers, including Rainguard Water Sealers Premium Paint Sealer, which is the focus of the provided information.
Firstly, let's delve into the key concepts and features mentioned in the article:
-
Rainguard Water Sealers Premium Paint Sealer:
- Formulated with a water-based silane and siloxane acrylic blend.
- Provides superior protection against wind-driven rain, mold, mildew, and moisture damage.
- Non-toxic formula with a clear semi-satin sheen that minimally alters surface texture.
- Resists surface damage caused by chalking.
- Does not yellow, crack, or peel, even in direct sunlight.
-
Micro-Lok™:
- A proprietary ingredient in Paint Sealer.
- Ensures the absorption of the sealer into the surface.
- Creates a long-lasting hydrophobic barrier unaffected by weathering, dirt, freezing temperatures, UV light, and wind-driven rain.
-
Where To Use:
- Ideal for interior or exterior use on painted floors, chimneys, patio furniture, fences, walls, and garden fences.
-
Coverage:
- Up to 150 sq. ft. per gallon.
-
Number Of Coats:
- At least 2 flood coats are recommended, with additional coats depending on surface porosity.
-
Application Temperature:
- Between 40°F – 80°F.
-
How To Apply:
- Applied with a hand-pump garden sprayer.
- Dry time varies based on temperature.
-
Easy Clean Up:
- Clean up with soap and water directly after application.
- Overspray on glass and decorative metals can be cleaned with a damp cloth.
-
FAQ:
- Addresses common questions, such as whether it can be used on unpainted surfaces, if it can be painted over, and the wait time after painting before applying the sealer.
-
Freeze / Thaw Damage:
- Suggested reading on the company's blog.
-
Mix Ratio for Concentrates:
- Detailed instructions for diluting concentrates for different quantities.
-
Weather Conditions:
- Emphasizes application during moderate temperatures with low humidity and dew point levels.
-
Clean and Prep:
- Instructions for preparing the surface, including cleaning, drying, and protecting adjacent areas.
-
Mixing:
- Guidelines for mixing ready-to-use products and concentrates.
-
Application:
- Recommends at least 2 heavy coats, with additional coats for older surfaces.
- Different application techniques for vertical and horizontal surfaces.
-
Cure Time and Water Repellency Test:
- Specifies cure time (4-7 days at 75°F) before achieving full water repellency.
- Advises a water test to determine if additional coats are needed.
-
Clean-Up:
- Highlights the water-based formula and provides instructions for equipment cleanup and overspray on windows or glass.
The comprehensive information provided demonstrates a deep understanding of paint sealers, their application, and the specific features of Rainguard Water Sealers Premium Paint Sealer. If you have any further questions or need clarification on specific points, feel free to reach out for expert guidance.
