My Cannabis Plants Are Growing Too Tall: What Should I Do? - RQS Blog (2024)

Is your cannabis plant too tall? Stretchy, spindly plants can be a nuisance for a lot of reasons. From falling over to burning themselves on your lighting rig, plants with uncontrolled growth are not desirable.

And a taller plant does not necessarily mean a bigger harvest. In fact, tall cannabis plants can be a sign that they are unhappy—particularly, that they do not have enough light. As well as causing your plants to stretch, a lack of light will negatively impact the size and quality of your final crop.

So, how do you stop weed plants from growing too tall? There are many options at your disposal, and some will help to increase your yield too!

Why Should You Stop a Cannabis Plant From Growing Too Tall?

There are a lot of good reasons to stop cannabis plants from growing too tall. Whether it’s to maximise the potential of a grow space or to keep the grow hidden, you need to ensure your plants don’t grow uninhibited.

Here are some reasons to rein in a marijuana plant’s growth:

Why Is My Cannabis Plant Growing Tall and Skinny?

If your weed plants are getting too tall, one of the first things to do is identify why it’s happening. Otherwise, you may use the wrong solution, which will negatively impact your grow.

Reasons your weed plants might be getting too tall include:

How To Control a Cannabis Plant’s Height in the Vegetative Stage

The vegetative stage is generally the best stage during which to rein in your plant’s growth. This is because you can afford to inflict damage on it, and it will recover before it starts flowering. During the flowering stage, however, damage may just lead to a reduced yield. So don’t wait to act!

• Bending or Low-Stress Training

Low-stress training (LST) and bending are great methods to keep stretching under control. In fact, they’re just good practice. Not only will they keep plants lower to the ground, but they will increase light penetration to all of the bud sites, resulting in larger yields.

By tying the main stem down laterally, the side of the plant becomes the canopy. This provides a much greater overall surface area exposed to strong light. As such, bending both controls growth and allows for greater and more equal bud development across the whole plant.

It is a method best employed from fairly early on. For autoflowering plants it is particularly good, as they don’t handle high-stress techniques well.

• Topping

This is a more aggressive training method. Topping involves quite literally cutting the top of the plant off, where the main cola would begin to grow. By doing this, the plant recovers by growing not one but two new main colas. These tend to grow outward, rather than upward. So once again, not only do you control the plant’s height, but you get more bud too!

Just make sure you do this during the vegetative stage, otherwise you’ll just be chopping off your main bud!

• ScrOG

The screen of green (ScrOG) method involves growing your plants through a mesh screen and tying them down. Therefore, instead of growing upward, they begin to grow outward. Once again, this technique exposes the maximum surface area to light.

• Pre-Flowering Topping

Letting your plants grow untouched during the vegetative phase, then topping just prior to flowering also controls height. When your plants are about to enter the flowering stage, top all branches. This has the effect of reining in the flowering stretch; instead of focusing energy on stretching out, the plants are urged to produce new flower growth.

Occasionally, pre-flower topping needs to be a full pre-flower pruning. If your plants fill the grow space during the vegetative phase, there is no way there will be enough room for flowering. It is time to get drastic. Aggressively prune the plants to half their size, and switch your lights to a 12/12 flower cycle.

Don’t worry, cannabis is very hardy and can even recover from being reduced to a stalk with only one or two leaves remaining. Try not to beat yourself up about the loss of time and reduced final yields. All lessons are good lessons on the way to becoming a weed growing expert.

• Move Tall Plants to the Edges

If it’s too late, and some of your plants have stretched, you might just want to move them to avoid light burn. The intensity of the light is strongest in the middle, and so by moving the plants to the side, they’ll be less likely to get burnt. Moreover, smaller plants will get more light, making them less likely to stretch.

One thing to be aware of, though, is that if the taller plants are already stretching, moving them out of the most intense light might just exacerbate the problem.

This can be done during either the vegetative or flowering stage.

How To Control Height in the Flowering Stage

Ideally, you’ll notice that your cannabis plant is too tall during the vegetative stage, and you’ll do something about it then. But life is not always ideal! As mentioned, some strains can double in size during the early flowering stage, while others change nowhere near as much. If you’ve never grown a certain strain before, you may not know how predisposed to stretching during flowering it is. As a result, you might find your grow space suddenly overwhelmed and in need of a remedy.

• Raise Grow Lights As High as Possible

At this stage your options are limited, and hopefully upward growth will soon come to an end. So with that in mind, one of your best options might be to move your lights higher and just try to avoid light burn. Plants will not stretch all the way through the flowering stage.

Depending on your grow space, though, this might not be possible.

• Reduce the Number of Light Hours per Day

Plants need light to grow (you probably know this). Therefore, reducing a plant’s supply of light will reduce its ability to grow. You don’t want to reduce it too much, as then you’ll just ruin your crop. But taking it down to 11 or even 10 hours a day should hopefully minimise stretching at this point.

• Lollipop Your Plants

Lollipopping is one of the few training methods designed to be used during the flowering stage. Not only can it prevent your plant from growing too tall, but it will reduce humidity and the chance of mould, and it will hopefully increase your yield too. Just bear in mind that if you’re using it to control growth, it must be done prior to stretching. It cannot remedy it once it’s happened.

To lollipop, remove all the lower growth of the plant. Though you might think it’s all precious, the leaves and buds at the bottom will get next to no light, but will still take up the plant’s energy. In fact, cannabis plants will naturally shed lower leaves that are using more energy than they’re producing. This is just accelerating that process.

• Progressive Harvest

If your plants are too tall and getting burnt, it’s best to harvest the upper buds as soon as possible. Once their trichomes start to turn milky, cut them off. It may not be ideal, but it’s probably the best option. By doing this, the lower colas will get more light and hopefully produce higher-quality buds.

• Turn Down Light Intensity

If you don’t have the option of moving your lights higher, and your plants have already stretched, one of the only options left may be to reduce the intensity of the lights to reduce light burn. If it gets to this stage, you may have to accept some burn or reduction in your yield.

But make an effort to balance the power reduction and the plants’ heights, and you should be able to come away fairly unscathed.

• Supercropping During Flowering

This is a desperate measure that should only be enacted as a last possibility. It involves drastically bending the tallest branch of your plant, in the flowering phase.

Your plant will put energy on recover that part, so it can be detrimental overall.

However, if it gets to this stage, it’s about damage control. It’s likely that if you left them on, you’d fry your plant—so don’t get upset about what could not have been!

If you do this early enough, the lower branches and buds will grow taller and larger, and will hopefully go some way to make up for your loss.

Too-Tall Cannabis Plants: Learn From Your Mistakes

Every grow is a huge learning experience, and so long as you take note of what went wrong, there’s no harm in failure. In fact, so long as we take heed, there’s no failure whatsoever. With that in mind, how can we prevent stretching and unnecessarily tall plants next time?

• Use Smaller Pots

Pot size partially determines the maximum possible size of a plant. The bigger a plant grows, the bigger the root system will be. So if your last crop grew too tall, reduce the size of your containers next time—this should limit their growth. The best part about this option is that it doesn’t require intervention during the grow, and poses no threat to your plants’ health (so long as the pots aren’t extremely small).

• Keep Grow Lights at the Optimal Distance

Keeping grow lights at the perfect distance from your crop will stop them from stretching, especially during the vegetative stage. You want them more or less as close as you can get them without risking light burn. Just make sure you move the lights higher as the plants grow!

• Consider the Type of Light

Different types of light provide more or less power, and autumn into different spectrums. Using the right power and spectrum of light will encourage your plants to grow thick and strong rather than surge upward in search of light.

• Research Your Strains

If you buy a commercial cannabis seed, or you know what strain you're growing, there will be information available about average heights—both indoors and out. This will tell you how tall a plant will get if grown in optimal conditions.

If a plant’s average height is looking like it might be pushing it for your grow, consider going for a smaller specimen to give some leeway in case of stretching. On the whole, indicas grow low and bushy, whereas sativas grow tall and spindly.

• Don't Wait Too Long To Flower

As stated, the longer you veg the plant, the taller it will grow. So switch it at the right time. If it does get too big, top it, let it recover, and then switch it to flowering. You have a lot of room to play around while you’re still in the vegetative stage.

As plants can double their size during early flowering, look at the maximum height listed for the strain, and then switch to flowering when it’s half this size. It may well come in under this expectation, depending on the strain, but it’s unlikely to get much bigger than that.

• Consider Growing in a Taller Grow Space

This is a luxury many simply don’t have. However, if your crop got too big for your grow space last time around, consider using a bigger space next time. Having more space won’t just allow for extra stretching, but will help with ventilation, making a healthy crop more likely.

Important Considerations for Tall Cannabis Plants Indoors

When plants get tall indoors, there are two major things to look out for.

• Humidity

Cannabis transpires a substantial amount of water. Marijuana prefers a relative humidity (RH) of 50–65%. When they get too big, humidity can become a problem as the plants constantly release water vapor into the air. Water then gathers on leaves and other surfaces in the grow room, potentially causing mould and other issues.

If humidity is becoming a problem, a dehumidifier or increasing exhaust fan power can help. Defoliating can also increase airflow to control humidity. Remove lower and mid-level fan leaves only. This has the added benefit of increasing light penetration to the lower flowering branches.

• Temperature

As with humidity, when plants get too big, temperature in the grow-op can rise. Reduced airflow and excessive height can drive up temperature and position plants too close to grow lights. Cannabis thrives when the temperature averages 25°C. When temps exceed this, plants are more likely to stretch. High temperatures can also affect leaf and flower formations, as well as final bud flavour and potency.