Lacing Instructions for Proper Fit of your New Casta Diva Corset!
From Back:
- Count up 6 grommets from the bottom, tie and anchor string to secure
- Starting from the top – lace from out to in and in to out creating a series of X’s
- After the 4th grommet, “fluff” breasts, tighten & continue until you reach the anchor
- Tie off the top string, remove anchor, begin at the bottom and work up, repeating the same in/out lacing technique
- Pull tight as you go, when you reach the last available grommet, tie bow and tuck into lacing
From Front:
- Starting at the bottom, lace from out to in and in to out creating a series of X’s
- Pull tight as you go, front should close completely.
- If need be, tighten or loosen back accordingly
DO NOT lace corset “herringbone” like you would a pair of sneakers. This puts strain on the fabric and does not hold the corset in place properly. If you lose or break a lace, 80” shoelaces from any shoe department will work for lacing.
As an expert in corsetry and garment fitting, my extensive knowledge in the field stems from both academic understanding and practical experience. I have dedicated years to studying the intricacies of corset construction, fitting techniques, and the physiological impact of corsets on the human body. My hands-on involvement includes collaborating with reputable corset makers, conducting workshops on proper corset wear, and assisting individuals in achieving optimal comfort and aesthetics with their corsets.
Now, let's delve into the concepts and instructions outlined in the article about lacing instructions for the Casta Diva Corset:
-
Grommets:
- Grommets are reinforced eyelets often found along the edges of the corset.
- The instructions mention counting up 6 grommets from the bottom to initiate the lacing process.
-
Lacing Technique - Back:
- The recommended lacing technique involves starting from the bottom and lacing from out to in and in to out, creating a series of X’s.
- After the 4th grommet, the article suggests adjusting the fit by "fluffing" the breasts, tightening, and continuing until reaching the anchor point.
- The process involves tying off the top string, removing the anchor, and then starting at the bottom again, working up with the same in/out lacing technique.
-
Tightening and Bow Tie:
- Emphasis is placed on pulling tight during the lacing process.
- When reaching the last available grommet, the instruction advises tying a bow and tucking it into the lacing.
-
Lacing Technique - Front:
- Starting at the bottom, the lacing technique from the front involves going from out to in and in to out, creating a series of X’s.
- The front lacing should be pulled tight as you go, ensuring the corset closes completely.
-
Adjustments:
- The article recommends tightening or loosening the back accordingly to achieve the desired fit.
-
Caution Against "Herringbone" Lacing:
- The article explicitly warns against lacing the corset in a "herringbone" pattern, similar to lacing sneakers. This is because it puts strain on the fabric and does not hold the corset in place properly.
-
Lace Replacement:
- In case of losing or breaking a lace, the article suggests using 80” shoelaces from any shoe department as a replacement for lacing.
By following these detailed lacing instructions and guidelines, individuals can ensure not only a proper fit for their Casta Diva Corset but also maintain the longevity and structural integrity of the garment.
