Everybody loves a beautiful bouquet of flowers but let’s face it. After a coupleof days,the flowers start to wilt and then you have a depressing reminder that not onlydo you have to throw away the beautiful gift that somebodygave you, but alsothat you can't keep flowers alive. Both things will ruin your day.
If this isthe case then fear not, you are not alone my friend, and you shouldbe happy to know that there is a secret to remedying this situation. In orderto know how to fix the problem, we must know why it happens.
The secret is inthe ability for water to travel up the capillaries of the stem. These capillariesare like little straws that direct the water to all the different partsof the flower.
In order for a flower to keep standing tall and strong, these capillariesneed to remain unclogged and full of water. Stuff like dirt, air pockets, and nasty bacteriaare all capable of cuttingoffthe flowers supply of water.
So how do we prevent the water supply from being cut off?
Theanswer is in the PH (or the acidity) of the water your flowers are in. PH ismeasured on a scale of 1 to 14. The lower the PH of the water, the more acidicthat it is.
There is a sweet spot for most flowers. A PH of about 3.5 to 5.0 isideal. Having slightly acidic water is good for the flowers because not onlydoes it kill all that bacteria blocking the stems, but it also makes the watertravel through the capillaries of the flower more easily, thus keeping clear ofdirt and air pockets.
Nowyou may be wondering, how do I lower the PH of my flower’s water?
There are a fewways of doing this, both DIY and commercially. One common way is by adding alittle bit of vinegar to the flowers water but be warned. Vinegar is veryacidic and has a PH of about 2. This is much too acidic for flowers and can possiblykill them faster than if you left it out completely.
Also it is not good to give flowers continuousexposure because the acid may possibly weaken the flower's steams, even if in theappropriate PH range. That’s why I recommend using a commercial productdesigned for flowers.
Floralife® QuickDipis a product that we use on every flower brought into our shophere at TCG Floral, and it is so easy to use.
QUICK DIP INSTRUCTIONS
- Pour 1 to 2 inches of QuickDip in anon-metallic clean container (No need to dilute the solution, you can use itright out of the bottle)
- Dip the newly cut flower stems in itfor about 1 second
- Place the flower in a clean vasefilled with a mix of clean water and floral solution
And that’s it! So easy, just like I told you. Noworrying about killing your flowers with vinegar, just a second or two to dipyou flower and you are done!
BONUS!
Here aresome Pro Tips when using QuickDip:
- Get it Here:https://www.tcgfloral.com/tcg-floral-floralife-quickdip-16oz-bottle/
- Do not pour used fluid back into container (you may contaminate your solution)
- Donot use with metal cups, or leave any metal in contact with solution
- Perfectto use with your fresh cut flowers (Obviously if you want your flowers to lastlonger)
- Greatfor all flowers (especially Roses, Gerberas, Lilac Blooms, and Hydrangeas
As a seasoned floral expert and enthusiast, I've had extensive experience in the world of flowers and the art of keeping them vibrant and fresh. My expertise extends beyond mere admiration for their beauty; I've delved deep into the science of flower care, understanding the intricacies of factors that contribute to their longevity.
The key to a long-lasting bouquet lies in the maintenance of the capillaries within the stems. These tiny vessels act like straws, transporting water to every part of the flower. The unfortunate wilting of flowers often stems from the clogging of these capillaries due to dirt, air pockets, or harmful bacteria.
To address this issue, it's crucial to consider the pH (acidity) of the water in which your flowers are immersed. I've found, through years of hands-on experience, that maintaining a specific pH level is paramount. The ideal range for most flowers falls between 3.5 to 5.0 on the pH scale. This slightly acidic environment not only inhibits bacterial growth but also facilitates the smooth flow of water through the capillaries, preventing clogs from dirt and air pockets.
Now, you might be wondering how to achieve and maintain this optimal pH level for your flowers. There are various methods, both do-it-yourself (DIY) and commercially available. One popular DIY method involves adding a small amount of vinegar to the water. However, caution is advised, as vinegar, with a pH of about 2, can be excessively acidic and potentially harm the flowers.
For a safer and more reliable solution, I recommend using a commercial product specifically designed for flowers. At TCG Floral, we swear by Floralife® QuickDip, a product that has consistently proven its effectiveness. This easy-to-use solution ensures the right pH for your flowers, eliminating the risk of over-acidification.
Using Floralife® QuickDip is a breeze, as evidenced by our routine practice at TCG Floral. Simply pour 1 to 2 inches of QuickDip into a non-metallic container, dip the freshly cut flower stems for about 1 second, and place them in a vase filled with a mixture of clean water and floral solution. It's a quick and efficient process, sparing you the worry of inadvertently harming your flowers.
As a bonus, here are some pro tips for using Floralife® QuickDip:
- **Don't pour used fluid back into the container to avoid contaminating the solution.
- Avoid using metal cups or leaving any metal in contact with the solution.
- Perfect for use with fresh cut flowers if you want them to last longer.
- Suitable for all flowers, with a special mention for Roses, Gerberas, Lilac Blooms, and Hydrangeas.
For those interested in acquiring Floralife® QuickDip, you can find it . Trust me, this product has been a game-changer in the world of flower care, and your bouquets will thank you for it.
