Facts About Mold - Fast Mold Removal | MMR Mold Stain Remover | Mold Disinfectants (2024)

FACT: Mold’s function in nature is to break down and decompose dead organic material. This leads to the odor associated with mold.
FACT: Mold is always in the air around us naturally both inside and out, the only way to control indoor mold growth is to control the indoor moisture.
FACT: Mold spores are extremely tiny and float through the air. They can maintain their viability to reproduce in many environments until they land on a appropriate surface.
FACT: If the air is sufficiently humid over a sustained period many molds can get their moisture requirements to grow from the air. This makes basem*nts and attics especially susceptible.
FACT: If mold is a problem in your home you must clean up the mold and eliminate sources of moisture, without sufficient moisture the mold cannot grow.
FACT: Mold grows well on organic substances, especially those containing cellulose such as wood and paper. They grow more rapidly on processed cellulose items such as paper than on wood in its natural state.
FACT: There are molds that can grow on wood, paper, carpet, fabric, and foods.
FACT: Mold growths can be many colors such as: black, green, red, pink, orange, yellow, etc. depending on the type, substance they are growing on (digesting) and moisture level.
FACT: Water problems or leaks can cause mold growth, fix as quickly as possible.
FACT: Potential health effects and symptoms associated with mold exposure include allergic reactions, asthma, respiratory complaints, and more.
FACT: Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
FACT: Small patches of mold (less than 1 square foot) can be cleaned off of surfaces with water and detergent. Make sure to dry completely.
FACT: Mold growth can be prevented in some areas by preventing condensation on cold surfaces by adding insulation. (For example windows, piping, exterior walls, roof, or floors).
FACT: In areas where there is a constant moisture problem one way to prevent mold buildup is to avoid installing carpeting (For example by drinking fountains, by sinks, or on concrete floors with leaks or frequent condensation as often happens in basem*nts).
FACT: Although molds cannot grow on inorganic substances such as metal or glass they can grow on built up dust and dirt that accumulates on these items provided sufficient moisture is present.
FACT: It is important to dry water damaged areas and items within 24-48 hours to prevent mold growth.
FACT: Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
FACT: With water, molds grow. Without water, molds die but the spores do not. If water returns, the spores regenerate growing colonies of mold. Some water leaks in a home are seasonal (e.g., rain leaks, air conditioning leaks), and others are irregular (pipes, shower, etc.). Consequently, humidity in a home varies through time and between locations, so the types and concentration of mold and mold spores that can be found from one test to the next can vary.

Submit a Comment

Facts About Mold - Fast Mold Removal | MMR Mold Stain Remover | Mold Disinfectants (2024)

FAQs

Does mold remover actually work? ›

In the real world, yes, these sprays do work – but they have significant limitations. If you find some mold in your home and you use one of these sprays to target that area, you should see most of the mold die off rather quickly.

How does a mold remover work? ›

gel formula clings to surfaces and uses powerful. enzymes to penetrate deep-down into the surface, killing and removing the mould you CAN see and even. the mould you CAN'T see.

What is the main ingredient in mold remover? ›

Mold and Mildew Remover Gel

The product is essentially a gel formula that is designed to gradually break down mold and mildew while erasing any stains left behind. Its main ingredient is sodium hypochlorite, which the Centers for Disease Control and Prevention approves of as an effective household disinfectant.

Is mold stain remover the same as mold remover? ›

The presence of visible stains is not an indication that an item is contaminated. The removal of mold stains can be included in appearance enhancement. As such, it is clear that mold stain removal is not a substitute for mold remediation.

Can you sleep in a room after using mold remover? ›

The fumes can be quite overpowering and may disturb your sleep if you apply it before going to bed.

What kills 100% of mold? ›

Yes, bleach is a potent biocide that can be used to kill mold. The active ingredient in bleach, sodium hypochlorite, reacts with water to form hypochlorous acid, which kills mold by denaturing proteins, inactivating enzymes, disrupting nucleic acids, and destroying other cellular components.

What kills mold permanently? ›

If cleaning with detergent doesn't work, it's possible to remove mould using diluted vinegar and a microfibre cloth. If mould cannot be removed using the vinegar method, cleaning with diluted bleach or a commercial product may be required.

How long does it take for mould remover to work? ›

Spraythe surface from 3-5 cm distance and leave HG Mould Spray to work for 30 minutes. In the case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with a sponge and water.

Is mould Remover safe? ›

Mildew removers are common household cleaners. Swallowing, breathing in the product, or spraying it in the eyes can be potentially dangerous.

What is the strongest mould remover? ›

Specialist Mould Blast Stain Remover

Effectively removes mould and mildew stains in minutes so that no scrubbing is required! Simply spray, leave and wipe clean.

What chemical kills all mold? ›

Bleach kills virtually every species of indoor mold that it comes into contact with including mold spores which leaves a sanitized surface making it resistant to future mold growth. However, bleach is only effective if the mold is growing on non-porous materials such as tiles, bathrubs, glass and countertops.

What is the best rated mold remover? ›

The Bottom Line. Clorox Plus Tilex Mold & Mildew Remover is the best overall mold remover due to its impressive efficiency and ease of use.

Can I use mold remover in washing machine? ›

Chlorine bleach is the most effective mold remover to use in a washing machine. If you are sensitive to chlorine bleach, you can substitute hydrogen peroxide. Do not mix the two chemicals.

Is hydrogen peroxide or vinegar better for mold? ›

If you don't have hydrogen peroxide, cleaning vinegar is a great substitute that can be used safely on most porous and non-porous surfaces. Distilled white vinegar can work too, since the acidity in vinegar can slowly break down the structure of mold and kill it, but it will work much slower than cleaning vinegar.

Can mold be dead but still stain? ›

The area can be free of mold (due to mold remediation) yet remain visibly stained. This is where mold cleaning comes in. Not to complicate the matter, but to add some clarity to the issue of mold, mold spores are dangerous. They are dangerous whether alive or dead.

Can you ever really get rid of mold? ›

Mold can be removed from hard surfaces with household products, soap and water, or a bleach solution of no more than 1 cup of household laundry bleach in 1 gallon of water.

Is mold removal effective? ›

A simple mold removal process is never enough to solve mold problems in your home, unless the infected area is too small.

What is the most effective way to remove mold? ›

Pour 3% concentration hydrogen peroxide into a spray bottle. Spray the moldy surface completely to saturate the area with hydrogen peroxide. Leave the surface to sit for 10 minutes. Scrub the area to make sure to remove all the mold and mold stains.

How long does it take for Mould remover to work? ›

Spraythe surface from 3-5 cm distance and leave HG Mould Spray to work for 30 minutes. In the case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with a sponge and water.

Top Articles
Latest Posts
Article information

Author: Melvina Ondricka

Last Updated:

Views: 6481

Rating: 4.8 / 5 (48 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Melvina Ondricka

Birthday: 2000-12-23

Address: Suite 382 139 Shaniqua Locks, Paulaborough, UT 90498

Phone: +636383657021

Job: Dynamic Government Specialist

Hobby: Kite flying, Watching movies, Knitting, Model building, Reading, Wood carving, Paintball

Introduction: My name is Melvina Ondricka, I am a helpful, fancy, friendly, innocent, outstanding, courageous, thoughtful person who loves writing and wants to share my knowledge and understanding with you.