Can You Grow Autoflowers with LEDs? | Fast Buds (2024)

• 1. Why to use leds with autoflowers?
• 2. Can you grow autoflowers with leds?
• 3. What are led lights?
• 3. a. Types of leds
• 4. The advantages of using led lights
• 5. The disadvantages of using leds
• 6. How to grow autoflowers with leds
• 7. Things to keep in mind when growing autoflowers with leds
• 7. a. Light distance to plant
• 7. b. Listed wattage vs actual wattage
• 7. c. The easiest way to calculate led efficiency
• 7. d. How many led watts are needed per plant?
• 7. e. Heat
• 7. f. Use lights with better features
• 7. g. Research, research, and more research
• 8. In conclusion

Even as a beginner, you’ve probably heard of LEDs. LEDs were introduced just a few years ago, and growers wouldn’t even consider growing marijuana plants because they weren’t as good as other high-intensity lights in the market. However, just like people changed their minds regarding autoflowers, LEDs managed to turn around and produce great yields. Autoflowers are easy to grow, despite what you’ve been told. They adjust to any growing condition as long as it isn’t extreme. Similarly, they will grow no matter what light you use, but obviously, stronger lights equate to stronger plants, better quality, and higher yields.

The importance of high-quality lights can’t be overstated. You can feed your plants all of the nutrients they require, dial in your watering schedule perfectly, and train them optimally, but without good lights, all of this effort becomes almost meaningless. After all, plants require light to perform photosynthesis, which leads to the creation of carbon-based sugar compounds. Plants use these sugars in their own tissues, but also to tame and “farm” beneficial microbes to trade for nitrogen and other important nutrients.

For example, cannabis plants dump out sugars through their roots to attract specific microorganisms, either to form symbiotic relationships or to improve nutrient cycling in the rhizosphere (the area in the soil just outside the roots. Even more interestingly, cannabis plants also likely release carbon compounds in their trichomes (the glands that produce cannabinoids and terpenes) to feed microbial populations that fix valuable nitrogen from the atmosphere. But what does this all mean? It means lights are of the utmost importance when growing autoflowering weed varieties. LEDs can certainly provide enough light energy to fuel these critical interactions, but there’s plenty to consider when purchasing a light for your growing set-up. Find out everything you need to know about using LEDs for autos below.

1. Why to Use LEDs With Autoflowers?

Even though it’s not obligatory, it’s highly recommended to grow autoflowers under LEDs because of the full-spectrum light they emit; Obviously, it’s better to use good quality bulbs than not-so-good LEDs because you can still get great results with light bulbs but due to the high efficiency and lower power consumption, a lot of growers are migrating to LED fixtures. Despite not being the reality a couple of years ago, most growers consider LEDs better than bulbs nowadays and they've become so popular and accessible that even beginner growers are opting for LEDs.

Many cannabis growers elect to use LED over more traditional lights for a variety of different reasons. For example, long-term costs are definitely part of this decision. While a high-quality LED unit will cost you more in the short-term compared to, say, HPS lights, they’re kinder to the wallet long-term because they’re cheaper to run. Because of this, they’ll also reduce your carbon footprint as a cultivator, meaning you can grow your green in the greenest way possible. Reduced energy consumption also means LED light puts out less heat. This becomes especially useful indoors, where growers go to great lengths to balance the temperature and humidity within their cultivation space. Having a light that doesn’t churn out lots of heat means you’ll have one less variable to worry about.

Additionally, some LED lights emit ultraviolet rays in the form of UVA and UVB. This form of light partially mimics the radiation emitted by the sun that plants are exposed to when grown outdoors. Some research shows that light on this spectrum helps to drive the biosynthesis of secondary metabolites in cannabis plants, including the production of cannabinoids and terpenes. While more research is needed in this area, UV light could serve as a simple means of boosting the flavour, aroma, and potency of your cannabis buds.

You can grow your autos however you want and as long as you do it properly, you’ll have great results but because autoflowering cannabis has a limited lifetime, it’s essential you grow them under the best lighting you can, remember that the best light should not only provide the intensity needed for the grow space and number of plants but also provide a spectrum that will encourage your plants to show its maximum potential.

So for example, if you were to compare two clones grown in the same conditions but one being grown under a full-spectrum LED and the other grown in an MH/HPS bulb mix, it’s most likely that the one under LEDs develops better due to receiving all the spectrum wavelengths that it would get in nature.

As you may know, cannabis plants in nature grow under the sun so to get the best quality possible your light source should emit that resembles the sun’s light as close as possible, and that is the case with high-quality LED fixtures.

Obviously, you will find all kinds of LEDs and most of them won’t be better than bulbs but if you’re really willing to invest in your grow setup, a high-quality LED light will have exceptional results and you will surely be able to see the difference in the quality, density and trichome production of your flowers.

Just remember that expensive LEDs don't do magic, they are just light fixtures so you will also have to improve your grow setup because even the best LED won't have good results if the overall conditions (nutrients, temperature, humidity and etc.) are up to par so make sure you have the knowledge and prepare your whole grow tent or grow room before spending $1000 on a LED.

2. Can you grow autoflowers with LEDs?

Yes, of course, you can! In fact, you can grow any type of plant using LEDs without any issues. They last for a long, long time with some lights continuing for more than 50,000 to 100,000 hours! Even though LEDs are different from bulbs, both of them fit the same purpose when talking about Cannabis. Obviously they have their differences but are used to grow autos and photos alike, some growers even mix LEDs and light bulbs in the same tent with great results. Here’s a quick example of how your autoflowers might fare under LED lights:

A demo video from one of our growers.

As you can see, the color combination ends up looking white, that's what you should look for when buying LEDs. The plants are super healthy, the buds are quite dense and the plant is strong, that's what you can expect when using good-quality LED fixtures. Contrary to what some growers might think, autos really aren’t that different to other forms of cannabis. Sure, they grow quicker, flower automatically, and maintain a smaller height, but the difference pretty much stops there. These traits emerge from a small genetic difference. These aside, you can treat your autos in a similar fashion to any other weed plant. They still require high-quality lights, the same macronutrients and micronutrients, and respond well to certain forms of training. In other words, your autos will very much appreciate waves of LED light that help them to drive photosynthesis.

3. What are LED Lights?

LEDs have been around for a while but only recently their popularity has increased, as technology advances, LEDs have been developed for other uses, and growers have benefited from that. But what exactly are LEDs? LEDs – Light Emitting Diodes – are lights that can be used to grow almost any type of plant. Technically speaking, it contains two semiconductors – electrons and holes. While electrons are negatively charged, the holes are positive. When an electric current is applied over the light, the two semiconductors collide with each other and release energy, otherwise known as photons.

How LEDs work.

This entire process is known as recombination. The LEDs introduced at the very beginning weren’t of any advantage to a grower since the light output was meager compared to other lights; however, with technology and years of research, many manufacturers now produce outstanding LEDs that almost mimic the sun’s full spectrum.

Types of LEDs

Standard purple LEDs

These were the first LED fixtures available and are still widely available today, and although they're not the best you can still get good results with them for cheap. This type of LEDs is the cheapest out there but lacks in build quality, light quality and sometimes can result in lower yields. When growing with this type of LED, you can add complemental horizontal lighting with the proper led strip spacing or vertical lighting with light bulbs to provide good light to the lower part of the plants.

COB LEDs

Cob LEDs (aka chip on board) is a bit more expensive than standard lights but has a better penetration due to their intensity while being relatively efficient. The only drawback is that they don't have a good coverage due to their format, so you'll need a bit more to properly cover your growing space.

Spread or spider-style LEDs

These types of LEDs are the latest in LED light fixtures, due to their format they can cover a big area and are widely used in commercial operations due to their high efficiency and wide light spectrum. With this type of LED fixture, you'll get the most gram per wattage and efficiency but can be extremely expensive.

4. The advantages of using LED lights

When compared to bulb fixtures, LEDs are a tad more expensive. Then why choose them? Well, LEDs may be a little more expensive than HPS or HID lights when you first purchase them, but the efficiency reduces cost in the long term, making LEDs certainly cheaper than maintaining HPS lights.

Full-spectrum

The spectrum refers to a light source that covers the wavelengths that are useful to animal and plant life, from infrared to ultraviolet. Obviously, no artificial light can mimic the sun but when talking about a full-spectrum light it means that it emits the entire visible spectrum and the important qualities of natural light.

The visible spectrum.

Even though not all LEDs emit all the wavelengths, you can find full-spectrum LED fixtures that will surely make a difference in the quality of your harvest. Cannabis plants produce trichomes to protect the flowers from UV rays because that’s where the seeds will develop so if you’re growing with a good quality LED your plants will end up having more resinous and denser buds than with light bulbs.

Less Heat

LED fixtures will emit less heat than bulbs while emitting the same light intensity and drawing less power, you can easily find LED fixtures that come with fans but usually, it’s not needed as long as you are dealing with good quality diodes, and have fans and an extractor properly working in your growing tent. Reduced heat production comes with an array of advantages, especially if you’re trying to grow autoflowering weed indoors within a warm climate. Cannabis plants like things warm, but start to suffer when the environment gets too hot. While air conditioners and fans help to keep temps under control, having a light that doesn’t pump out too much heat makes this balancing act a whole lot easier.

The advantages of using LEDs.

Overall, cannabis growing lights emit two kinds of energy: Light and heat. Because LED lights emit less heat, they are more efficient and will cost you less to run those types of lamps that run extremely hot. Not only does less heat help to keep running costs cheaper, but it helps to protect your plants, especially as they get bigger and grow closer to the top of the growing space indoors. Lights that run hot increase the chances of light burn. When leaves or buds get too close to a hot light source, they become stressed and even damaged by excess heat. This results in bleaching, yellowing, and even tissue damage. Obviously, this form of abiotic (non-living) stress can take a toll on cannabis plants and set them back a bit. Plus, if heat stress affects a bud or two, it can detract from their appearance and potency.

More efficient

Due to LEDs being more efficient, they can produce an equivalent to light bulbs using less energy. LED fixtures use up to 75% less energy while producing the same or even more light intensity. As an approximate guideline, LEDs use 12w to emit an equivalent to a 50wbulb.

More lifespan

LEDs have a lifespan of more than 50,000 hours, some even reaching up to 100,000 which is way more than bulbs, this is due to the low temperature of most fixtures. Light bulbs emit a lot of heat which reduces their lifespan, this means that although bulbs are cheaper you will have to replace them more often so LEDs are cheaper in the long term.

5. The disadvantages of using LEDs

Light is vital in the photosynthesis process which is equal to food for cannabis plants, and it’s extremely important for autoflowering plants that have a short lifespan. Now that you know why LEDs are so awesome, you might be interested to know the disadvantages as well.

Expensive

As mentioned already, the cost of LEDs is a bit more than other lights such as fluorescents, HPS, and MH lights. However, the LEDs that are being introduced now are so competitive that the prices have dropped down drastically.

The manufacturing market is saturated with too many LED manufacturers and it is indeed possible to purchase cheap LED lights. But, if you love big, thick buds then you have to go for the ones manufactured by brands that are a bit expensive.

The disadvantages of using LEDs.

Not all companies provide a complete spectrum

Most companies provide a complete spectrum of light; however, it’s recommended that you do your research before purchasing lights because some companies aren’t very technologically advanced yet. If you do purchase an LED, make sure that it comes with all the colors required for your lovely autoflowering cannabis plants to grow.

Directional light

Even though this has been fixed in newer fixtures, the light emitted by some LEDs is directional (like a flashlight), this means the area covered is less than when using bulbs, although manufacturers describe the coverage for vegetating and blooming plants so you will know everything you need to know before buying them.

The light LEDs emit is directional so it may cover less than some bulbs.

Aging diodes

As time passes by LED diodes can start to change color, even though they can last more than 50,000 hours, they can fail or even burn.

If you invest a little more ina better quality you'll avoid having to fix it for a long time, usually branded LEDs are made with good diodes which can last years and years without a problem.

Problems with individual diodes are more common with cheaper LEDs but if you can invest a little more and buy a good fixture it’s unlikely it will happen.

6. How to grow autoflowers with LEDs

A major advantage of using LEDs is that you don’t have to change the light to match the stages of the plant. For instance, the plant needs a lot of blue light in the vegetative phase and more red light in the flowering stage. In such stages, growers use MH lights and switch to HPS lights during flowering. Even if you use CFLs, “Cool Blue Daylight” lights are used specifically in the growing phase.

Some LEDs emit the whole spectrum of wavelengths so there's no need to change the light fixture for each stage.

Since LEDs contain all the colors (full-spectrum), there’s no need to switch the lights between phases. But, remember that this is true only with certain lights because some LEDs being introduced now come with separate vegetative and flowering switches. No, you don’t have to switch to a different light, but you may have to manually control the switches.

Best LEDs for autos

There isn’t the best LED for autos, as longs as it’s a good quality fixture you’ll be fine. When buying an LED, remember that not all of them emit the whole spectrum so have that in mind, we also recommend you read all the information about it, like how much space they cover in the vegetative stage and in the flowering stage, check for the listed wattage and the actual wattage (which is how much they actually draw from the wall) and read a lot of reviews about it, this will help you decide on the best one for you.

Remember that LEDs are quite intense so when growing autos with them you should be careful, although autos aren't affected by light toxicity as much as photoperiodic plants but ideally, you should grow in a lightproof space.

7. Things to keep in mind when growing autoflowers with LEDs

Light Distance To Plant

Growing seedlings with LEDs can be a little tricky. Seedlings are very fragile, and if the lights are too close, they tend to burn. Conversely, they grow tall and lanky if the lights are far away. So, the trick is to maintain the perfect distance between the plant and the light. This is why many growers use T5 fluorescent lights, CFLs, and MH lights to tend to seedlings. However, if you plan to use LEDs for the entire cycle, you need to be very careful at the beginning. For starters, read the manufacturer’s instructions carefully. Most lights are placed at a distance of at least 18-22 in (46-56cm) away from seedlings, and you can do that too.

Keeping the light fixture at the right distance will provide the best growth.

Once you observe how the plants react, you’ll be able to judge the distance yourself. Autoflower seedlings need to be observed much more because the plants can get stunted if the tender leaves get burnt.However, you can remove any guesswork by harnessing the power of science. Instead of relying on distance as a measure of light intensity, you can directly measure light intensity using two different methods. The cheapest way to do this is by purchasing a lux meter. Lux is the unit of illuminance per unit area, meaning you can figure out the intensity of light falling across your growing space.

However, lux only measures wavelengths of light that can be seen by the human eye. Although not ideal, it’s still helpful to get a rough idea of light intensity. You should aim for a lux of 6,000 during the seedling stage, 30,000 during veg, and 50,000 during flowering. Alternatively, you can invest in a slightly more expensive PAR meter that measures the wavelengths of light that plants use during photosynthesis. Using this device, you should aim for a PAR level of 500–1000 micromoles per square meter.

Listed Wattage vs Actual Wattage

Manufacturers usually claim their LEDs are 1000W or 2000W but that’s actually the LED equivalent to bulbs, when looking to buy an LED, you should also look at the actual power that light fixture draws from the wall, this equivalent often differs depending on the quality of the diodes and efficiency of the light fixture.

For example, low-efficiency LEDs that range from $50-$150 in general, 1 LED watt is the equivalent of 1.45 HPS watts. As said above, the equivalency varies depending on the quality of the light fixture, so for example, with medium efficiency LEDs that range from $150-$600 (usually) 1 LED watt is equivalent to 1.75 HPS watts. And with the high-efficiency LEDs that range from $600-$1500 or more, 1 LED watt is (approximately) equivalent to 2.17 HPS watts.

Listed Wattage vs Actual Wattage

By following this table you can know how much you’ll really be providing to your plants, flowering with the optimal wattage will result in healthier plants, better quality flowers, and a bigger yield. Remember that this is approximate and the equivalent will change according to the brand and overall quality of the light fixture.

The Easiest Way To Calculate LED Efficiency

To calculate the equivalent for your specific LED fixture you should divide the equivalent by the actual power to get the equivalent for 1 LED watt. So for example, if your LED is listed as being the equivalent to a 600w HPS but only drawing 350w from the wall, do the following:

600 ÷ 350 ≈ 1.71 HPS

The higher the result, the higher the efficiency of the LED fixture so it’s a good way to know the efficiency of that new LED you’re planning on buying.

How Many LED Watts Are Needed Per Plant?

Despite LEDs being more efficient, you still have to provide at least the minimum wattage needed for your plants to develop properly. If you don’t want to spend too much, you can get away with providing the minimum LED wattage (or the equivalent for bulbs) per plant as listed below, but for the best results is recommended you provide the ideal wattage.

Minimum and ideal LED and bulb wattage per cannabis plant.

When dealing with this, you need to have in mind that the listed wattage is not actually the power LEDs draw from the wall so we added the approximate light bulb equivalent in case the manufacturer doesn’t provide the actual wattage.

Heat

Autoflowers have a lot of growing to do and they do it very fast. So fast that you’ll be on your toes to keep up with it. If you want the very best yields, you must be prepared to work for it. And talking about maintaining the plants, heat plays a major role. Autoflowering cannabis plants thrive in environments where the temperature is neither too cold nor hot. If the temps exceed 35°C, the yields diminish quickly and the buds begin to burn too. Similarly, they cannot stand temperatures that go below 15°C.

LEDs with fans help aid you when controlling the heat in your growing tent.

Fortunately, you can play God when growing indoors and control the temperatures. But, it becomes easier if you plan it well. For instance, some lights like HIDs emit a lot of heat and the temperatures soar pretty quickly. Even though it’s not that common, some LEDs exhibit similar tendencies and produce too much heat. Therefore, make your life easier by purchasing lights with inbuilt fans to reduce the heat.

Use Lights With Better Features

LEDs offer so many features that it can be mind-boggling. From dimming to power efficiency to a full spectrum, they appear to be the perfect companion to your autoflowering plants. However, while some companies offer all the features, they come with a price tag.

LEDs with better features give you an advantage when growing cannabis.

If you’re really interested in quality yields, though, look for lights that offer ‘dimming’ features. Some lights come with knobs that can be used to adjust the brightness of the light. For example, plants need less light during the vegetative phase and more light during the flowering phase so to save energy and money they can be dimmed. However, if you absolutely cannot afford such lights, it’s still okay because the plants will grow even if you don’t dim the lights.

Research, Research, and More Research

The only way to grow excellent plants is by choosing great lights. And you need to do a lot of research to buy lights that suit your setup. LEDs are available in various sizes and watts, and the differences in costs and features can be jaw-dropping. For instance, a branded 300W light can cost anywhere from $80 to $100, bigger brands offer the same at $350 but even newer ones can reach up to $1000 due to the research they’ve made and the money invested in making the best possible fixture they can.

Remember that not always the more expensive LEDs are better so make sure you research a lot before buying your light fixtures.

If you dig a little further, you’ll be surprised – nay, shocked – to find out that some brands offer 1000W lights for just $70 and others sell the same wattage LED for up to $1500! Amazing, eh? Obviously, there are differences in how the lights perform, and it’s up to you to figure out what your plants truly need.

8. In conclusion

You don’t need the best lights in the market to grow good cannabis but if you want to stay updated with the latest technology and improve your harvests, LEDs are the way to go. Not only it will improve your harvest but will also consume less energy, making up for the initial investment in the long term. If you have changed from bulbs to LEDs and noticed a difference, feel free to share your experience in the comment section below!