Step 3. Set the Water Temperature
Using the correct water setting in your washer can make a world of difference in your laundry. Hot water, for instance, sanitizes and kills germs better, but in some cases, it can shrink your clothes, fade your fabrics, set certain stains, and requires a lot more energy. So, reserve hot water washes for bath and kitchen towels, bedding, sturdy fabrics and any extremely dirtied items. For moderately dirty loads, dark colors, and the permanent press cycle, use warm water. Last but not least, use cold water in the delicate cycle for delicate items, fabrics that have dyes that might bleed, or clothes that aren’t especially dirty. Coldwater is the gentlest way of washing your garments, and it also requires less energy, so you can save energy and protect the environment.
Designed to deliver outstanding stain removal in all water conditions, Tide laundry detergents offer an effective cold water clean even for dirty items.
FAQs
You'll want to prepare by gathering supplies and sorting your laundry, treat stains and add the right detergent, and choose the correct wash cycle and temperature for your load. Finally, you'll need to dry your laundry according to the fabric type of each item in your load.
What are the step-by-step procedure while using washing machine? ›
Step-by-Step guide to washing clothes in a washing machine
- Step 1: Separate your clothes.
- Step 2: Choose washing cycle.
- Step 3: Set water temperature.
- Step 4: Add detergent and fabric softener.
- Step 5: Put in the clothes.
- Step 6: Turn on the washing machine.
- Step 7: Take out the clothes, clean the washing machine.
You'll want to prepare by gathering supplies and sorting your laundry, treat stains and add the right detergent, and choose the correct wash cycle and temperature for your load. Finally, you'll need to dry your laundry according to the fabric type of each item in your load.
What are the five steps to using a washing machine? ›
The 5 basic steps
There are five basic steps when using a washing machine: turn the machine on and put your laundry in; add the right detergent (and some fabric conditioner, if you're using it); select the right cycle and temperature; close the door and press start; and unload at once.
What are the 4 steps of washing machine? ›
Some garments need to be laid flat.
- Add laundry detergent. Once you've chosen the right laundry detergent for your load, like Ariel Matic Top Load Washing Powder, place the detergent into the empty drum or laundry dispenser drawer if your machine has one.
- Add your clothes. ...
- Select the cycle. ...
- Unload the laundry.
Turning your laundry inside out before washing makes sure that any friction between garments that can cause damage, staining, on the outside of your garments. If there is any bleeding or damage, it's the inside of your clothing, which no one will ever see, that takes the beating rather than the outside.
Where do I put detergent in the washing machine? ›
Pour detergent in the dispenser or, if there isn't one, directly into the tub before adding clothes. Always follow the instructions on the packaging when measuring. If your washer is High-Efficiency (HE), only use HE detergent. Learn more about HE detergent with this quick guide.
How many minutes to wash clothes in a washing machine? ›
How many minutes to wash with washing machine? At a minimum, a washing machine can complete washing clothes in about 15 minutes for a small amount of clothes or single items. However, the average wash time for a regular full load is about an hour.
What are the general rules for washing clothes? ›
DO separate colours and pre-treat stains. Separating clothes by colour will help to prevent any colour run disasters so divide your weekly washes into four piles: whites, lights, darks, and delicates. Once you've got enough of one pile to put it in the machine, check the garments for stains.
How should you wash towels? ›
Most towels should be washed in warm water in a regular cycle, but read the tag to be sure. "If the label stresses that you should separate your dark colors from your white colors, you better do that," say Garnet Hill's experts. "And each towel could differ depending on the fibers."
Water temperature refers to cold, warm or hot options. To reiterate Sansoni's guidelines, cold water should be the default for all laundry. Cycle length determines how long washing will be. Use longer cycles for heavily soiled and bulky items, and shorter cycles for less soiled or delicate items.
Should you run a washing machine empty first? ›
Your very first 'run' - should be an empty machine. Make sure it's connected to the water supply, and just run a quick-wash cycle. That'll make sure everything's working as it should.
Where to put liquid detergent in a washing machine? ›
When using the drawer on your washing machine to add detergent, liquid and powdered detergent go in the same main compartment. The difference arises when it comes to adding detergents to the drum. Liquid detergent can go into the drum with no problem, but this should be avoided with powder.
Should I put detergent in washing machine first? ›
Putting the soap in the water first will make sure that the soap is distributed evenly to get all the clothes clean.
